Participants

Jackie Bolles; Executive Director, Treasury and Investor Relations; Allison Transmission Holdings Inc

G. Frederick Bohley; Chief Financial Officer, Senior Vice President, Treasurer; Allison Transmission Holdings Inc

David Graziosi; Chairman of the Board, President, Chief Executive Officer; Allison Transmission Holdings Inc

Ian Zaffino; Analyst; Oppenheimer & Co., Inc.

Rob Wertheimer; Analyst; Melius Research

Tim Thein; Analyst; Raymond James

Angel Castillo; Analyst; Morgan Stanley

Tami Zakaria; Analyst; JPMorgan

Kyle Menges; Analyst; Citi

Luke Junk; Analyst; Robert W. Baird & Co., Inc.

Jerry Revich; Analyst; Goldman Sachs

Presentation

Operator

Good afternoon. Thank you for standing by. Welcome to Allison Transmissions' third-quarter 2024 earnings conference call. My name is Kevin, and I'll be your conference call operator today. (Operator Instructions) As a reminder, this conference call is being recorded.
I would now like to turn the conference call over to Jackie Bolles, Executive Director of Treasury and Investor Relations. Please go ahead, Jackie.

Jackie Bolles

Thank you, Kevin. Good afternoon, and thank you for joining us for our third quarter 2024 earnings conference call. With me this afternoon are Dave Graziosi, our Chair and Chief Executive Officer, and Fred Bowley, our Chief Operating Officer, Chief Financial Officer, and Treasurer. As a reminder, this conference call, webcast, and this afternoon's presentation are available on the Investor Relations section of AllisonTransmission.com. A replay of this call will be available through November 12th.
As noted on slide 2 of the presentation, many of our remarks today contain forward-looking statements based on current expectations. These forward-looking statements are subject to known and unknown risks, including those set forth in our third quarter 2024 earnings press release and our annual report on Form 10-K for the year ended December 31, 2023, as well as other general economic factors. Should one or more of these risks or uncertainties materialize, or should underlying assumptions or estimates prove incorrect, actual results may vary materially from those that we expressed today.
In addition, as noted on slide 3 of the presentation, some of our remarks today contain non-GAAP financial measures as defined by the SEC. you can find reconciliations of the non-GAAP financial measures to the most comparable GAAP measures attached as an appendix to the presentation and to our third quarter 2024 earnings press release. Today's call is set to end at 5.45 p.m. Eastern Time. In order to maximize participation opportunities on the call, we'll take just one question from each analyst.
Please turn to slide 4 of the presentation for the call agenda. During today's call, Fred Bohley will review our third quarter 2024 financial performance and review updates to our full year 2024 guidance. Dave will close with an update on recent announcements across our business prior to commencing the Q&A. Now, I'll turn the call over to Fred.

G. Frederick Bohley

Thank you, Jackie. Good afternoon, and thank you for joining us. As we progress through 2024, demand for Class 8 vocational vehicles continues to drive notable performance in Allison's North America on-highway end market, leading to record results for the business as a whole. I would like to take a moment to thank our team for their combined efforts, working diligently to meet the unprecedented demand we are seeing for our 3,000 and 4,000 series products in North America. While continuing to work toward the realization of our $100 million incremental annual revenue opportunity in our defense-end market, as well as drive our growth objectives outside North America to capitalize on increased adoption of automatic transmissions.
Please turn to slide 5 of the presentation for the Q3 2024 performance summary. Year-over-year net sales increased 12% from the same period in 2023 To a record of $824 million. The increase in year-over-year results was led by a 22% increase in the North American on-highway end market, principally driven by strength in demand for Class 8 vocational vehicles and medium-duty trucks and price increases on certain products. Year-over-year net sales were further improved by a 23% increase in our defense end market The increase was principally driven by increased demand for tracked vehicle applications. And finally, year-over-year results were improved by a record third quarter in our outside North American on-highway end market. The increase in net sales in the outside North American on-highway end market was principally driven by higher demand in Asia and price increases on certain products, partially offset by lower demand in Europe. Gross profit for the quarter was $396 million, an increase of $39 million from $357 million for the same period in 2023. The increase in gross profit was principally driven by increased net sales and price increases on certain products, partially offset by higher manufacturing expense. Net income for the quarter was $200 million, an increase of $42 million, or 27% from the same period in 2023. The increase was principally driven by higher gross profit and lower interest expense net. Adjusted EBITDA for the quarter was $305 million compared to $267 million for the same period in 2023. The increase in adjusted EBITDA was principally driven by higher gross profit. Diluted earnings per share increased 29% year-over-year to an all-time quarterly record of $2.27. The increase was driven by higher net income and lower total shares outstanding. A detailed overview of our net sales by end market and Q3 2024 financial performance can be found on slides 6 and 7 of the presentation.
Please turn to slide 8 of the presentation for the Q3 2024 cash flow performance summary. Adjusted free cash flow for the quarter was $210 million compared to $182 million for the same period in 2023. The increase was principally driven by higher gross profit, partially offset by higher operating working capital funding requirements, and increased cash taxes and capital expenditures. During the third quarter, we paid a dividend of $0.25 per share and repurchased over $50 million of our common stock. We ended the quarter with a net leverage ratio of 1.4 times, $788 million of cash, and $745 million of available revolving credit facility commitments. In addition, we continue to maintain a flexible, long-dated, and covenant-like debt structure.
Please turn to slide 9 of the presentation for the update to our 2024 guidance. As a result of the ongoing strength in the North American on-highway end market, we are raising our full-year guidance midpoints for revenue, earnings, and cash flow. Allison expects net sales to be in the range of $3,135,000,000 to $3,215,000,000. In addition to Allison's 2024 net sales guidance, we anticipate net income in the range of $675,000,000 to $725,000,000. Adjusted EBITDA in the range of $1,115,000,000 to $1,175,000,000 Net cash provided by operating activities in the range of $740,000,000 to $800,000,000 Capital expenditures in the range of $135,000,000 to $145,000,000 And adjusted pre-cash flow in the range of $605,000,000 to $655,000,000 Thank you, and I'll now turn the call over to Dave for an update on recent announcements across our business.

David Graziosi

Thank you, Fred. Allison continues to see robust demand for our on-highway products, particularly our 3000 and 4000 series fully automatic transmissions due to unprecedented Class VIII vocational vehicle demand stemming from sustained infrastructure spending in North America. In order to meet this elevated demand, throughout the year we have made investments in our supply chain and operations to not only manage capacity, but also improve manufacturing throughput. Last week, we announced further plans for long-term sustainable growth and global capacity increases for our on-highway products through investment in our Chennai, India facility. Opening in 2010, our Chennai, India facility serves as the headquarters in the region, Expanding our presence while initially fabricating parts to support global production of our 1,000 and 2,000 series on-highway products. After demonstrating the ability to meet Allison's best-in-class manufacturing practices, the facility expanded capabilities to assemble our 1,000 and 2,000 series transmissions in 2012 while relying on components provided from our Indianapolis sourcing supply chain. We are excited to invest to nearly double the manufacturing footprint of the India facility, increasing fabrication capabilities for components of our 3,000 and 4,000 series on-highway products, giving us the ability to tailor our global production to meet regional demand. Our investment of over $100 million will be spread over the next few years, with nearly half of that total project spend expected to occur in 2025. As operations begin in 2026 and ramp up to full production in 2027, this investment will support our long-term growth objectives in the outside North America regions, raising our global capacity and offering operational cost savings. Through this investment, our global manufacturing operations will return to optimized levels of production, offering cost savings through efficiency gains, while increasing Allison's ability to meet the future demand for our on-highway products driven by the continued global adoption of automatic transmissions. We look forward to providing further updates as the project progresses. In support of our wide-body dump initiative representing $100 million of incremental annual revenue opportunity, during the quarter, we announced strategic partnership and executed a memorandum of understanding with Lugan a top-tier global construction equipment manufacturer. The MOU signing took place in Indonesia as part of a customer ride-and-drive event showcasing Lugang's latest 70-ton widebody dump truck equipped with Allison's innovative 4800 widebody dump series transmission. Our long-standing partnership with Lugang has been instrumental in our success in the global mining sector with this MOU-promising continued collaboration and innovation as we progress towards our incremental annual growth revenue target through share gains and market expansion. Also, in our outside North America on highway end market, we recently announced our collaboration with Ashok Leyland One of India's leading commercial vehicle manufacturers to introduce the first low-floor city buses equipped with fully automatic transmissions in the southern India market. Allison's Torgmatic series transmissions will equip the 12-meter diesel buses, which are specially designed to accommodate passengers with disabilities. The Allison-equipped buses will replace buses currently equipped with manual transmissions advancing transportation in the region, and showcasing our efforts to lead the transition to automaticity outside North America. Further driving our growth in outside North America on-highway end market is our wheeled defense business. As a reminder, the wheeled portion of our defense business utilizes variants of our conventional on-highway products with revenue from international customers flowing through our outside North America on-highway end market. Last week, we highlighted numerous releases which will support continued growth as a result of our strategic partnerships with vehicle manufacturers to support wheel defense programs internationally using Allison's specialty series on-highway transmissions. To start, variants of our 4000 series fully automatic transmissions were chosen for the British Ministry of Defense Boxer Armored Vehicle Program. The German Federal Armored Forces will also begin receiving boxer vehicles equipped with Allison fully automatic transmissions starting in 2025. This is in addition to over 700 boxer vehicles that have been delivered in recent years to countries including Australia, Lithuania, and the Netherlands. The Canadian Department of National Defense and the Romanian Ministry of Defense will also be receiving wheeled defense vehicles equipped with a 4000 series variant. In Poland, a new contract was signed for procurement of light armored reconnaissance carriers equipped with a variant of Allison's 3000-series fully automatic transmission. Deliveries will span over the next decade to 2035. And finally, the United Kingdom Ministry of Defense has placed an order for high-mobility trucks that will utilize a variant of Allison's 2000-series fully automatic transmission. As demonstrated by these releases, Allison has made significant strides in the global defense market with achievement of key program wins. We look forward to further growth across the defense industry as we leverage our commercial vehicle expertise and relationship with OEMs along with decades of proven reliability and durability to offer a wide range of propulsion solutions that meet the diverse application requirements for tactical wheeled vehicles. Finally, as our end markets evolve, we remain committed to offering a portfolio of products designed to meet the needs of customers and industry regulations, regardless of technology and fuel source. Allison fully automatic transmissions are fuel agnostic, offering optimal integration with any fuel source, including gasoline, natural gas, propane, and hydrogen. delivering durability and reliable performance to strengthen sustainability initiatives without sacrificing fleet productivity and efficiency. To compensate for the lower power and slower engine response associated with alternative fuels, Allison's PowerShift technology and torque converter significantly improves startability, drivability, and overall productivity, particularly as compared to competitive manual and automated manual transmissions. In late August, we were pleased to announce that GLS, a global shipping leader, successfully completed 30,000 kilometers in its evaluation of the Allison-equipped Hyundai Exient hydrogen fuel cell truck. Since late 2023, GLS Germany has used the hydrogen fuel cell truck, equipped with Allison's 4,000-series fully automatic transmission, to deliver packages in the greater Cologne area. Additionally, since March 2024, The truck has been used for long-distance trips between Cologne and Mannheim. Allison's patented torque converter multiplies the drive motor's torque at startup, allowing the vehicle to operate with a smaller and less powerful drive motor, maximizing range and efficiency and helping to reduce vehicle costs. This pioneering integration exemplifies Allison's alternative fuel advantage and is a further step in the testing of environmentally-friendly propulsion technology. Furthering our capabilities with hydrogen as a fuel source, we are pleased to announce our 4000 series fully automatic transmission was also integrated into a Class 8 truck equipped with a hydrogen internal combustion engine that was displayed by Southwest Research Institute at Convec in September. The integration of the Allison 4000 series in the hydrogen internal combustion engine vehicle demonstrates the critical role Internal combustion engine powertrain solutions can and will play in moving the industry closer to ultra-low emissions. As our industry approaches 2027, there will be transitions in technologies for compliance under the EPA's Phase III emissions regulations. Announced during the quarter, we recently collaborated with Cummins to integrate and certify the Cummins B-series engines with our Allison E-Gen Flex Electric Hybrid Propulsion Solution System for the Transit Bus Market. The integration will meet the EPA's Phase III requirements while providing a reliable, low-emission propulsion solution in 2027 and beyond. Also in pursuit of compliance to emissions standards, we were pleased to announce an uprate to our B400 and B3400 XFE fully automatic transmissions. As the non-articulated bus industry transitions to the Cummins X10 engine in order to meet the EPA's Phase III requirements, the increased ratings for our B400 and B3400 XFE models will enable fleets to continue specifying Allison products as the propulsion solution of choice. As shown by these integrations, collaborations, and technology advancements, Allison is dedicated to offering products which comply with upcoming emissions regulations while continuing to deliver differentiated value that supports our customers' operational and sustainability goals. In summary, Allison's third quarter results demonstrate not only the robust demand in our core end markets, but also our long-term plans for growth as we invest in our manufacturing operations and our product portfolio. Our growth opportunities and investments highlight Allison's commitment to providing a diverse array of propulsion solutions that contribute to a reliable, more sustainable future in transportation. This concludes our prepared remarks. Kevin, please open the call for questions.

Question and Answer Session

Operator

(Operator Instructions) Ian Zaffino, Oppenheimer.

Ian Zaffino

Very good quarter. Quick question on the pricing outlook for next year. I know we're kind of getting towards the end of the year. How are discussions going there? And what type of magnitude do we think we're going to expect? Has the environment changed any of that thinking one way or the other? Thanks.

G. Frederick Bohley

Thanks, Ian. This is Fred. I think as you're aware, about 60% of Revenue in North America on highway. LTAs are coming due and we're in the middle of negotiating these currently. As we've talked about in the past, we continue to deliver a significant amount of value to the end market. Our fully automatics allow the commercial vehicles to operate more efficiently. So the type of things that that were more efficient we save on have continued to inflate up. You know, overall vehicle cost is up, cost of drivers are up, cost of maintaining equipment is up. So all the advantages that, you know, our fully automatic deliver have continued to elevate. And so as we sit here right now, definitely feel well-positioned. We're delivering a significant amount of value. There is very, very strong demand for our product. And, you know, we'll continue the negotiations and, you know, anticipate most of them concluding, you know, probably toward the later half of Q4.

Ian Zaffino

Okay. Thank you very much. Thank you.

Operator

Rob Wertheimer, Melius Research.

Rob Wertheimer

I am sorry to ignore all the good news on announcements and trials and everything else in operations that you talked about. I wanted to focus just on the balance sheet, use of cash, and so on. I mean, you guys have been super clear over the years. You've been very aggressive in buying back shares. I think, if I'm not mistaken, your cash balance is something like 8 or 9 percent of your market cap, and your maturities, I think, are out to 27. So just curious if you're pausing for any reason on aggressiveness on share buyback, if there's anything being contemplated, or how to think about that. Thank you.

G. Frederick Bohley

Rob, it's Fred. As you mentioned, our capital allocation priorities are pretty clear. It's first funding organic revenue and earnings growth. You see that with the recent announcement we made relative to manufacturing in India. Obviously, we talked about a lot going on in the product development space. Certainly, We've done some acquisitions and continue to look proactively at that, but our primary focus has been returning capital to shareholders. 63% of shares repurchased since we became a public company. We've increased the dividend five consecutive years, bringing it from $0.15 per share per quarter to $0.25 per share per quarter. It's certainly factual that we're holding a little higher cash balance than we have historically. We still are earning a very appropriate return on that. But, you know, long-term goal is to follow our capital allocation priorities and, you know, fund the business and, you know, ultimately return the excess cash to shareholders.

Rob Wertheimer

Manufacturing capital needs don't seem to be all that large versus what you have. So I assume it's more timing differential. Maybe you have an acquisition you're not going to talk about. but more timing differential on spending that cash. I mean, do you intend to keep a higher-than-average balance long-term, do you think? And I'll stop there. Thanks.

G. Frederick Bohley

No, I think it really is timing of returning cash to shareholders, Rob.

Rob Wertheimer

Perfect. Thank you.

Operator

Tim Thein, Raymond James.

Tim Thein

I just wanted to come back to the $400 million growth opportunity or outgrowth opportunity that you guys have outlined for some time. And it's a little hard to see externally where you're falling on that, but you talked about, I mean, and maybe defense is where we've seen a little bit more traction, but just kind of those four David's

David Graziosi

Tim, it's Dave. Let me just try to cover that off for you, and I appreciate the question. So, from a growth initiative perspective, we really highlighted four things. Wide-body mining dump, FRAC-TRAN, the regional haul or Class 8 tractor, DACAB, and, of course, defense, starting with defense, as you mentioned that one specifically. We continue to make very good progress there. I think you could tell by the prepared remarks. I think the team has done an excellent job. Frankly, spreading our customer base outside of the U.S. at this point is obviously focused on working with allies, but we continue to see a tremendous amount of opportunity there. In terms of our overall progress towards our target, that's probably one of the most advanced out of the four at this stage, with, we believe, a fair bit of tailwind to achieve the balance of that Thank you all for joining us today. The focus there, the key, will be some of the newer U.S.-sponsored programs as well as a number of outside North America initiatives. Regional Hall, Class 8, Tractor, Daycab, making, I think, decent progress there, although I would tell you market conditions, as you know, we've talked several times on our calls this year and, frankly, late last year, Some of the softness that you're seeing in the tractor market is having an impact there in terms of just overall volume that's actually achievable at this stage. So the team has done, I think, a very good job securing releases and driving it from a pull perspective with various fleets. But that market will largely, the outcome there will be tied to overall Demand in terms of the tractor market recovering. FracTrend, as you know, was purpose-built and designed for hydraulic fracturing applications. As we've again said several times during the year on other calls, hydraulic frac right now in terms of overall CapEx is rather muted, very disciplined approach by end-users in terms of spend, You know, at least the public comments, the most recent ones from some of those customers would certainly imply no significant recovery in terms of capital spending yet this year and quite possibly for 2025. So, very similar to Regional Haul Class A Tractor, will be a function of the market in terms of overall demand. The testing that we are doing and some of the activity we have, we're very pleased with the performance of. of that particular technology. It's also allowing us to expand into some of the newer applications within hydraulic frack around different energy sources, etc. So I think the team has done a solid job there working with a number of core partners of ours. And finally, with the wide-body mining dump, beyond the prepared comments and some of the releases that we've talked about, This year, that particular initiative I would describe as making very solid progress. Again, some of that being tied to market conditions where you're seeing a level of global demand, as you well know, a bit mixed. But despite those market conditions, the partnerships with the OEMs that we have, they've done quite well in terms of securing market positions. throughout the world. So we're very confident in ultimately achieving that, as well as the other three initiatives. It's really just a function of time and broader market conditions there.

Tim Thein

Understood. Thank you, Dave.

Operator

Angel Castillo, Morgan Stanley.

Angel Castillo

Thanks, gentlemen, and I appreciate that you're taking my question. I just wanted to touch base on the fourth quarter a little bit more. It seemed like it's a pretty wide range in terms of the EBITDA implied, of kind of 20% decline year-over-year to potentially flat. It seemed like a pretty wide range. As you think about the level of visibility you have to the fourth quarter, I recognize last quarter, or last earnings call, you talked about holidays and some of those dynamics that, you know, impact your year-over-year as well as a kind of tough comp. But can you just help us understand maybe the range of outcomes? What are the assumptions that, you know, could result in a minus 20 year-over-year versus it being closer to flat at the top end?

G. Frederick Bohley

Sure. Sure, Angel. This is Fred. We've highlighted this a couple quarters in a row, but I think it's really important to just think about six or seven fewer workdays for the OEMs to build and, you know, This year, we've averaged $12-13 million in revenue a day. So you play that out, you know, our expectation is that they're not going to build at the levels they built the last couple of years. And they're probably going to go back to the normal seasonality that we've seen, you know, pre-pandemic, you know, 18-19, where Q4 would be soft. So that's really at the starting point. You know, driving, you know, where our midpoint guide is on a sequential basis from a revenue standpoint. And that's, you know, that's really just flowing through from an EBITDA standpoint. You know, we do have, you know, as you look across, we've got engineering, SG&A slightly elevated sequentially, but the biggest driver really is, you know, the top line and You know, and the type of margins that we make. So what would drive the performance higher is clearly, you know, if the OEMs, you know, attempt to work more days, basically working, you know, Saturdays or into the holidays. But at this point, where they are relative to, I think, their total order boards and the softness that you're seeing across line haul, just makes this year stack up a little different than what we've seen the last couple years.

Angel Castillo

Very helpful. Thank you.

Operator

Tami Zakaria, JPMorgan.

Tami Zakaria

Very nice quarter. Two questions for you. The first one is about the facility investment in India. I think you mentioned capacity is doubling there. So when you ramp to full production in 2027, what kind of incremental volume do you expect versus what it is right now? I'm trying to understand the size of the incremental sales opportunity from this increased capacity in 2027.

David Graziosi

Tami, good evening. It's Dave. I appreciate the question there. To be clear, when we talk about capacity expansion, we are doubling the manufacturing square footage in India. In terms of capacity, it's focused on our on-highway products, specifically around fabrication for our 3- and 4,000-series products. That capability will allow us to, frankly, meet the growth Q&A Q&A Q&A Q&A Q&A Q&A Q&A Q&A Q&A You know, plus or minus 20% increase. So you figure somewhere in that range of 10 to 20%. Again, depending on availability for all components, et cetera, but we are not expanding capacity for assembly. It's expanding capacity for fabrication for demand outside North America.

Tami Zakaria

Got it, got it. Okay, that's very helpful. And my second question is, I think you mentioned unprecedented demand in Thank you all for joining us.

David Graziosi

I'd tell you, we don't use the word unprecedented lightly. The amount of demand that we have seen throughout this year, and frankly, it started, as you probably know, the second half of last year, some ramp up there. We have not heard anything from a market perspective, whether that be end users or OEMs. Sensing any level of pullback on overall demand, you know, as we've talked about on prior calls, you had a level of suppressed production because of COVID for a number of reasons. At the same time, you've had this enormous injection of capital into the market driving demand for Vocational products, so whether that be infrastructure spending, other investment initiatives and incentives, they are out there and driving demand. So we are, again, seeing nothing at this point that would tell us that, you know, this is a near-term end in sight. I think quite frankly, at least from the public comments of vehicle OEMs, I think they've indicated across the board very strong demand well into 2025. On the back end of 2025, you also have this issue of, as you know, emissions changes for 2027 and what that potentially does as well in terms of just taking normal demand and accelerating some of that. As we mentioned on the July call, Having said all of that, there's a bit of a governor in this entire process about how much higher it can go, at least when you look at it quarter to quarter, simply because many industry participants are operating at some level of max capacity right now, which is not long-term sustainable, frankly. So you are I think naturally have some level of limit or governor and how much higher it can go on an instantaneous basis. Therefore, one could conclude the cycle gets stretched out further simply because demand can't be currently met. You also have the other governor in the process, which is the amount of capacity that's out there in terms of bodybuilders. and what those lead times are. And much of that is not really tied necessarily to material as much as it is just conversion, which is skilled labor, availability, etc., which we've mentioned many times on our calls and one that we continue to see as a constraint throughout the industry.

Tami Zakaria

Agreed. Wonderful. Thank you.

Operator

Kyle Menges, Citigroup.

Kyle Menges

Thanks. I was hoping if you could provide a little more insight into parts performance in the quarter. I noticed that for the first couple quarters had been calling out North America as the area of weakness, but now it's turned to just globally seeing some weakness. So it would be helpful to understand which geographies potentially still seeing some weakness or maybe some recovery and just how to think about parts into next year and what it would take to see parts growth next year and what geographies would be likely to drive that. Thank you.

G. Frederick Bohley

Sure, Kyle. This is Fred. You know, really on a year-over-year basis, you know, there wasn't significant movement from parts. When you think about where we are full year, certainly, you know, the first half of 2023 was a pretty challenging comp coming into 2024. You know, as we're looking at, you know, at the balance of the year, you know, Q4 could be down mildly sequentially. And then as you look out into 2025, I think it's still going to be a fairly good year. You're sitting here where 2024 is going to be your second best year on record next to 2023. It's also an end market where we've been able to achieve price as well. So I think the outlook, you know, looks fairly robust rolling into 2025 at this point, but we don't see it returning to the, you know, H1 2023 level because all that pent-up demand's really been satisfied at this point.

Operator

Luke Junk, Baird.

Luke Junk

Another capacity question for me, specific to Allison's capacity, and just hoping you can frame up the levers that you have to pull on throughput from here, thinking specifically in North America, you know, without adding materially to capacity, I guess, if I look through the lens of defense this quarter, seems like there might be some additional breathing room opportunity, and maybe if you could speak relative to potential pre-buy as we move through later next year into 2026, and just your ability to scale up without adding significantly to overhead, including maybe offloading some incremental volume into that capacity expansion in India as you move through the peak. Thank you.

David Graziosi

That looked good, Dave. I appreciate the question. So, in terms of capacity, as we mentioned, it's not only investment that Allison is doing internally for our own operations. We're also investing in Our suppliers. So it's been a fairly comprehensive program of initiatives throughout our supply base, as well as the internal that we've already talked about. I would certainly offer the comments in terms of what we prepared. It's important to note, and I mentioned this briefly earlier, the industry is specifically around North America on Highway, for instance, running at Very high rates becomes a real challenge from a consumption of capital. So between the pressure on labor as well as just pressure on operations, it really requires a very diligent industry-wide initiative around maintenance, etc. And when you're running at very elevated levels, it really is quite challenging. So we've certainly throughout our Capacity and capital investments, investing in upgrading our equipment as well as some level of automation to address, I think, your point about how you think about an overhead structure. But the fact remains, as I said earlier, there are limits right now that we see in the industry. It still takes all the components to make the vehicle. There are certainly constraints. I do not believe that across the entire industry there is a tremendous amount of motivation to increase capacity meaningfully above where it sits today, simply because it is not efficient. When you start breaking shift schedules, etc., as we mentioned before on calls, it becomes very inefficient. Thank you all for joining us. There are cost savings as well that will be realized from that investment. In terms of defense on the cross-drive side, we have significant capital plans being executed for our cross-drive facility. Some of that capital is actually funded by the U.S. government. It's a contractor-owned, contractor-operated Thank you. Low-volume batch-type manufacturing. Our team over the years has really developed a manufacturing process and system that allows for that type of variability in terms of volume. We're also mitigating some of that as to the earlier question on growth initiatives to grow our defense business specifically in cross-strike. To level out, if you will, production in that facility, which allows us to perform better, but also reduce the cost to the U.S. government in terms of cost-plus type contracts. So a lot of work going on there, but overall, I think capacity, as Fred mentioned earlier, in terms of cap allocation, we are investing in growing the business organically. Thank you. Next question is coming from

Operator

Jerry Revich, Goldman Sachs.

Jerry Revich

I'm wondering if I just ask two questions. One, on EPA 2027, with the increase in trucks, you know, you folks have a higher value proposition and higher cost trucks. And I'm wondering, can you comment on whether you have an opportunity to increase your penetration rates on any vacations with EPA 27, given that backdrop? And then separately, you know, just to continue the Class A straight truck Conversation. Can you just talk about your level of confidence in the sustainability of demand? Because we're down to, you know, four and a half months of backlog. We had peaked at 10 or 11 months. And so I guess when we've seen other capital goods product lines have supply outpaced demand, you know, what gives you confidence that we're not going to hit that same point here, you know, as we look out three, four, five months, especially given where Class H trade inventories are.

David Graziosi

Jerry, it's Dave, appreciate the question. In terms of EPA 2027, I think it's fair to say still quite a few questions out there in terms of exactly how that's all gonna be implemented. The position of the OEM's portfolios, as you know, continues to evolve in reaction to that. We think of things in the context of we're always trying to grow our position in terms of penetration rates and focus on the areas, as Fred mentioned earlier, in terms of our value proposition. To answer your question, I'm not sure penetration over the longer term is going to be necessarily impacted. I would say, to your point on vehicle values, I think it's fair to say that the current push on Class 8 straight truck in terms of vocational, we are certainly, I think, very much strongly demonstrating the value of our fully automatic technology in that space. The team has done that for well over a decade or two at this point to reach the positions that we have. We continue to try to grow that. But overall, I think we're very pleased going into 2027 with the portfolio that we have. We're well-aligned to work with at least what's been developed and, I would say, certainly presented to the market in terms of a number of different alternative energy sources, etc., so we feel very good about that. And I'll let Fred cover that Class H straight truck question.

G. Frederick Bohley

Jerry, I mean, it's... Everything we see and hear shows no signs of it slowing down. The OEMs have been pretty clear. The demand for our product is clearly unprecedented. We had, last week, ACT Research in here. One thing that they were highlighting was really where the stimulus programs are in still very early innings. Thinking about the CHIPS Act, IRA, Maybe only 20% in at this point. Infrastructure Investment and Jobs Act, about 50% in. So there's still a significant amount of stimulus money in the U.S. that's out there to ultimately be funded. So it's obviously tough to predict, and we've got the pre-buy potential in 26, and maybe even into 25. I think those are Dave's earlier comments. There is, I think, a real question of how much higher can it go because, you know, everybody in that vocational space is constrained at this point. You know, component suppliers, bodybuilders, but the demand is clearly there with, I mean, just absolutely no signs of slowing down.

Jerry Revich

Thank you.

Operator

Thank you. We've reached the end of our question and answer session. I'd like to turn the floor back over to Dave for any further closing comments.

David Graziosi

Thank you, Kevin. And thank you for your continued interest in Allison and for participating on today's call. Enjoy your evening.

Operator

Thank you. That does conclude today's teleconference. You may disconnect your line at this time and have a wonderful day. We thank you for your participation today.